Blog

How Do You Choose a Translucent Roofing System for an Indoor Sports Facility?

At a glance

  • Engineered translucent polycarbonate system panels — panels joined by a standing seam and dedicated connectors — are the standard roofing route for indoor sports halls.
  • Weigh daylight level and solar heat gain first, then thermal transmittance, impact and load resistance, fire classification, acoustics and installation.
  • Danpal publishes tested airborne sound reduction of up to Rw (C,Ctr) 37 dB with Danpatherm K12, depending on the configuration.
  • Reaction to fire is classified per panel; system-level classification depends on the complete configuration, so check panel, system and market.

Danpal

Published:

Choosing a translucent roofing system for an indoor sports facility comes down to a short list of criteria: whether the roof is an engineered system or a set of sheets, how much daylight and solar heat the exact panel or assembly admits, its thermal value for the specified build-up, its tested durability and fire classification for the project's market, and whether the manufacturer supplies the documents and support needed to specify it. Translucent means light-transmitting but not see-through: the roof admits daylight without offering a view out. Danpal's working recommendation is glass where a view through the envelope is needed and its translucent solutions, in most cases, where the need is the passage of natural light; a well-designed building can use both. As of 2026, the Danpal roofing options a specifier can review include Danpal systems with Danpalon panels, the double-glazed Danpatherm RK7 roofing system, and Controlite, one of Danpal's proprietary products, published as a Controlite Roof BIM object.

Is the roof an engineered system or a set of sheets?

The first criterion for a translucent sports roof is whether you are specifying a system panel or a sheet. A system panel is a polycarbonate panel with a standing seam along its edge, joined panel to panel with a connector and dedicated system components, so the result is an engineered system designed for high air and water tightness and to carry wind and snow loads. A sheet is a flat polycarbonate board installed without that jointing system: no standing seam, connector or dedicated components.

What to ask about the system:

  • Jointing. Does the panel use a standing seam and connector, and which dedicated components complete the roof? Danpal pioneered the standing seam, and the system-panel approach became the industry standard.
  • Tested performance. Which results are recorded for the complete system? For example, Danpalon panels provided within a complete Danpal system showed no water penetration at a test pressure of 15 psf under ASTM E-331.

How do you weigh daylight against solar heat gain?

Ask for light transmission, the percentage of incident daylight a panel passes into the building, and the Solar Heat Gain Coefficient (SHGC), the share of solar energy that comes with it, for the exact color and thickness you intend to specify, because the panel that admits more daylight also admits more solar heat. According to Danpal's technical data, tested in accordance with ASHRAE 74-1988 procedures, clear Danpalon transmits 86% of visible light as a 4 mm compact panel, falling to 41% at 50 mm, with an SHGC falling from 0.81 to 0.43, while Reflective Grey transmits between 10% and 20% with an SHGC between 0.21 and 0.29; these figures are given per color and thickness band, are indicative and may change within manufacturers' production tolerances.

Which thermal values should you ask for?

Ask for the U-value of the specific panel or assembly you intend to draw, and confirm it for that configuration, because there is no single brand-level figure.

What to request Danpal figure Applies to
Assembly U-value, without and with insulation 1.18 and 0.79 W/m²K, with light transmission up to 35% and up to 19%, and SHGC 0.4 and 0.3 respectively Danpatherm RK7 double-glazed roofing system
Panel Ug 2.4 W/m²·K at 12 mm, 1.9 at 16 mm and 1.5 at 22 mm, CSTB calculated values Multicell Danpalon panel alone, without connectors or system components
Project build-up 0.75 W/m²·K with louvers closed and 0.85 W/m²·K with louvers open Controlite double-skin build-up with an inner Danpalon 30 mm skin at the Jules Ladoumègue sports complex

The RK7 figures suggest that, for a double-glazed roof, the thermal choice and the daylight choice are best treated as one decision: the insulation that lowers the U-value also lowers light transmission and solar gain. Danpal offers a thermal simulator as part of its project support, so the thermal performance of a candidate configuration can be modeled for the project.

What durability and fire evidence should you request?

Ask for test results against named standards, and for which panel and thickness each one applies to.

  • Color and light over time. Danpalon changes color by no more than 3.0 units Delta E and yellows by no more than 10 points on the yellowing index after 60 months, and its light transmission will not decrease by more than 6% after 10 years, measured to ASTM D2244, ASTM D1925 and ASTM D1003 respectively.
  • UV transmission. Tested to Australian Standard No. 1067-1990, Danpalon transmits less than 0.1% of ultraviolet radiation into the building.
  • Fire. Selected Danpalon panels achieve a B-s1,d0 reaction-to-fire classification under EN 13501-1:2002, and Danpal publishes a Broof (t1) classification under EN 13501-5 for the Danpatherm RK7 roofing system. Check the classification for the specific panel, system configuration and market.

What support and documents should the manufacturer provide?

A specifier generally needs a BIM object, system drawings and specification support before a translucent roofing system can be named in the drawings. Danpal publishes BIM objects on BIMobject for its systems, including the Danpatherm RK7 roofing system and Controlite Roof.

What Danpal states it provides:

  • Specification support. Its technical and specification team works directly with architects, with technical support and drawings from the specification phase through to support after the building is completed.
  • A tailored solution. Danpal is project-oriented and tailors a dedicated solution to each project's needs.
  • Installation backing. Danpal supplies pre-assembled cassettes, which simplify installation for the contractor and significantly reduce installation time, and can accompany the on-site installation and support the installer.

Sports projects among Danpal's published references include the Busan Sajik Indoor Tennis Court and the Jules Ladoumègue sports complex, whose tennis courts use a Danpal system.

Frequently Asked Questions

Can Danpal provide figures for a specific roof configuration?

Yes. Ask Danpal's technical and specification team for the figures, drawings and BIM files for the exact panel, color, thickness and system configuration you intend to specify.

Are Danpal products manufactured to ISO 9001 and ISO 14001?

Yes. All Danpal products are manufactured according to ISO 9001 and ISO 14001.


About this article

Danpal publishes this article under its own name and is responsible for its accuracy. Articles are researched and drafted with AI assistance and approved by Danpal before publication; publication and update dates reflect substantive edits, not automated refreshes. Last updated: 2026-11-17

Ready to get started?

See how Danpal can help.

Get in Touch